Reallocated sector count: what it means and what to do
In short: reallocated sector count (SMART attribute 5) is how many bad sectors the drive has swapped for spares. Read the raw value: zero is healthy. Any number above zero means back up now, and a count that grows week to week means replace the drive. It is one of five attributes tied to drive failure.
What the drive is counting
The drive found these sectors unreadable or unreliable and moved their contents to its pool of spare sectors. On an SSD the same attribute counts retired flash blocks. Every drive ships with a finite pool of spares; this is how much of it has been spent.
How to read the value
Read the raw value. Zero is what a healthy drive shows. The normalised value stays at 100 long after the raw count starts climbing, which is why a drive with real damage can still report "good" overall health.
Example: a Seagate ST2000DM001 printed 5 Reallocated_Sector_Ct 0x0033 098 098 010 … 1864. The normalised value (98) is still far above the threshold (10), so the drive reported PASSED — while 1,864 sectors had already failed.
What to do about it
Back up now. A handful on an old drive can sit still for years, but a count that grows week to week means the surface is degrading and the drive should be replaced. Backblaze found a non-zero value here in a large share of its failed drives and in only a few percent of its working ones.
To see every attribute on the drive at once, paste its report into the SMART report explainer.
Read it together with:
- Current pending sector count: sectors failing now that have not been moved yet; when they are, this count goes up.
- Uncorrectable sector count: sectors the drive could not read or fix at all.
Seeing this on a customer's drive?
Log it as a recovery job, send the diagnosis report by email, WhatsApp or SMS, and get the customer's digital signature approval before you image the drive. See data recovery management.
Reallocated sector count FAQs
The drive found these sectors unreadable or unreliable and moved their contents to its pool of spare sectors. On an SSD the same attribute counts retired flash blocks. Every drive ships with a finite pool of spares; this is how much of it has been spent.
Take it seriously. CrystalDiskInfo marks a drive Caution when this raw count is above zero, which is exactly the point to back up. It does not mean the drive will die today: recheck it weekly, and replace the drive if the number grows.
Because the normalised value and the raw value measure different things. The normalised value stays at 100 long after the raw count starts climbing, which is why a drive with real damage can still report “good” overall health. Read the raw value for this attribute.
No. The drive has already done what can be done — it moved what it could to spare sectors. Tools that claim to repair bad sectors only mark them unusable, which hides the symptom. If the count is growing, replace the drive.
Any count that is growing. Zero is healthy; a handful that stays put on an old drive can sit still for years; a count that rises week to week means the surface is degrading and the drive should be replaced. Back up as soon as it is above zero.
Sources: smartmontools attribute documentation; Backblaze, “What SMART stats tell us about hard drives”. Attribute data checked 15 Oct 2026.
Keep every drive diagnosis on the job
BytePhase keeps the drive, the diagnosis, the customer's approval and the handover on one repair job, so nothing lives in a notebook. 15-day trial.
Last updated: 21 November 2026
