bytephase logo
Uncorrectable sector count2026-11-21T15:07:51+00:00

SMART 198 · 187

Uncorrectable sector count (SMART 198 and 187): what to do

In short: uncorrectable sector count (SMART attribute 198) counts sectors the drive's own background scan could not read or repair, and SMART 187 counts reads that failed even after error correction. Either one above zero means data is already lost: back up, verify important files, and replace the drive.

What the drive is counting

The drive tests itself in the background when idle. This counts the sectors that test found and could not correct — damage confirmed by the drive's own scan rather than by a read your computer happened to attempt.

Counts reads that failed even after the drive applied its full error correction. Unlike most SMART counters, this one records a request the operating system asked for and did not get — so each count is a moment where a file could not be read.

How to read the value

Read the raw value. Zero is healthy. Because it comes from the offline scan, it can stay at zero on a damaged drive that is never idle long enough to finish a scan — so zero here is weaker reassurance than zero elsewhere.

Read the raw value. Zero is what a healthy drive shows, for its whole life.

What to do about it

Back up and replace the drive. These sectors are gone, and whatever files occupied them are already damaged. One of Backblaze's five failure-linked attributes.

Back up immediately and replace the drive. This is one of the five attributes Backblaze found most closely tied to failure in its fleet. Files already affected are damaged, so verify anything important after copying it off.

To see every attribute on the drive at once, paste its report into the SMART report explainer.

Read it together with:

Seeing this on a customer's drive?

Log it as a recovery job, send the diagnosis report by email, WhatsApp or SMS, and get the customer's digital signature approval before you image the drive. See data recovery management.

Uncorrectable sector count FAQs

What is uncorrectable sector count?2026-11-21T14:07:48+00:00

The drive tests itself in the background when idle. This counts the sectors that test found and could not correct — damage confirmed by the drive's own scan rather than by a read your computer happened to attempt.

What is the difference between SMART 198 and SMART 187?2026-11-21T14:07:49+00:00

SMART 198 comes from the drive’s own background scan: sectors it tested while idle and could not fix. SMART 187 counts reads your computer asked for that failed even after full error correction. Both mean data could not be read, and both are among the five attributes Backblaze tied to failure.

My uncorrectable sector count is zero. Is the drive fine?2026-11-21T14:07:50+00:00

Not necessarily. SMART 198 comes from the offline scan, so it can stay at zero on a damaged drive that is never idle long enough to finish a scan. Zero here is weaker reassurance than zero elsewhere — check reallocated and pending sectors too.

Are the files on uncorrectable sectors lost?2026-11-21T14:07:51+00:00

The data in those sectors is already damaged. Copy everything off, then open or verify the files that matter, because some of them may be the ones this counter is about.

Should I replace a drive with uncorrectable sectors?2026-11-21T14:07:52+00:00

Yes. Back up and replace it. Unlike a counter that drifts up with age, every count here is real data the drive could not reproduce.

Sources: smartmontools attribute documentation; Backblaze, “What SMART stats tell us about hard drives”. Attribute data checked 15 Oct 2026.

Keep every drive diagnosis on the job

BytePhase keeps the drive, the diagnosis, the customer's approval and the handover on one repair job, so nothing lives in a notebook. 15-day trial.

Last updated: 21 November 2026

Go to Top