bytephase logo

AMC Contract Format: Clauses, Free Download and Filled Example

By Published On: November 21st, 2026Categories: Tips & Tricks7.1 min read
Table of contents
Share Post
Technician with a signed checklist beside a wall air conditioner, a visit calendar and a signed contract sheet, illustrating an AMC contract format for service businesses

When a customer asks for a yearly service plan, the paperwork is what decides whether the arrangement runs smoothly or ends in an argument. A clear AMC contract format spells out what is covered, how often you visit, how fast you respond and what it costs, so both sides know where they stand on day one.

In short: an AMC contract format needs the parties with addresses and GSTIN, a contract number, start and end dates, a schedule of equipment with serial numbers, the type of cover (AMC or CMC), the number of preventive visits, breakdown response time, parts coverage and exclusions, the contract value with GST and payment terms, renewal and termination terms, and signatures from both sides.

Running more than a few contracts? With AMC management software the covered devices, service visits and renewal reminders stay on one record once the contract is signed.

Below you will find what an annual maintenance contract is, the difference between AMC and CMC, each clause explained, a short filled example for an AC service contract, a blank AMC contract format to download as Word and PDF, and a few notes on GST and renewals. It is written for service and repair businesses (AC and appliance service, computers and IT, printers, RO purifiers, office equipment), though the format works for most equipment.

What is an annual maintenance contract (AMC)?

An annual maintenance contract is a written agreement in which a customer pays a fixed amount and the service provider looks after the customer’s equipment for a set period, usually one year. The provider makes planned preventive visits and attends breakdown calls as agreed. For the customer it means predictable costs and a technician who knows the equipment; for you it means recurring revenue and a reason to be in touch all year. Our guide to creating an AMC in BytePhase shows how this is set up in software.

AMC vs CMC: which type of contract?

The first decision in any AMC agreement format is the type of cover. A comprehensive contract (CMC) includes parts; a non-comprehensive one covers labour and visits only.

Point Non-comprehensive AMC Comprehensive AMC (CMC)
Preventive visits Included Included
Breakdown labour Included Included
Replacement parts Charged separately Included for the parts listed
Contract value Lower Higher, as you carry the parts risk
Best for Equipment where parts rarely fail Customers who want one fixed yearly cost

Even a comprehensive contract never covers everything, so the exclusions clause below matters as much as the inclusions.

Checklist of the 12 clauses an AMC contract format needs: parties, contract number, period, equipment, scope and type, service visits, response time, parts cover, value and GST, renewal, termination and signatures

The clauses an AMC contract format must have

Use this as a checklist. If a clause is missing from your current AMC contract format, add it before the next renewal.

  1. Parties: full name, address, contact and GSTIN of both the service provider and the customer.
  2. Contract number and date: a unique reference you can quote on every visit and invoice.
  3. Period: start date, end date and duration. State whether it renews automatically or only by agreement.
  4. Equipment schedule: each item with make, model, serial number, location or site, and warranty end date. Anything not listed is not covered.
  5. Scope and type: what the service includes, and whether it is AMC (labour and visits) or CMC (parts included).
  6. Preventive maintenance visits: how many, and when. For example four visits, one every three months, each ending with a service report.
  7. Breakdown response time: how quickly you respond to a call (for example within 24 hours), your working hours and how the customer raises a call.
  8. On-site or carry-in: whether you visit the premises or the customer brings the equipment to you.
  9. Parts coverage and exclusions: which parts are included, and what is never covered: physical or liquid damage, consumables, faults from power surges or voltage fluctuation, misuse or repair by others.
  10. Contract value, GST and payment terms: the amount, tax, payment frequency (yearly, quarterly or monthly) and due dates.
  11. Responsibilities of each side: access to the equipment, a suitable place and stable power from the customer; trained technicians, a service report and prior approval for chargeable work from you.
  12. Renewal, termination and signatures: how renewal works, the notice period to end the contract, and a dated signature from both parties.

Filled example: AMC contract format for an AC service

Here is a short example of an AC service AMC, using generic names. Replace every value with your own.

Contract no. and date AMC/2026/014, 1 April 2026
Service provider Your Shop Name, (address), GSTIN: (15 characters)
Customer Sample Customer Pvt Ltd, (address), GSTIN: (15 characters)
Period 1 April 2026 to 31 March 2027 (12 months)
Type Comprehensive (CMC): labour and parts included for the compressor, PCB, fan motor and sensors
Equipment 3 split ACs, 1.5 ton, (make and model), serial numbers listed in the schedule, ground-floor office
Preventive visits 4 visits, one every 3 months (June, September, December, March), with a service report each time
Breakdown calls Response within 24 hours, Monday to Saturday, 10 am to 6 pm, on-site
Exclusions Physical or liquid damage, gas top-up caused by external leakage, remote and filter consumables, power-surge faults, repair by others
Value and payment (amount) plus GST as applicable, payable half-yearly in advance
Renewal and termination Renewal by written agreement before 31 March 2027; either side may end the contract with 30 days’ written notice
Preview of the blank AMC contract format, an A4 three-page template available as Word and PDF

Download the blank AMC contract format (Word and PDF)

This blank AMC contract format is A4, three pages, with every clause above ready to fill in. Use the Word file to edit it for your business, or print the PDF and complete it by hand.

This is a general format for information only and is not legal advice. Have it reviewed by your lawyer before you use it with customers.

GST on an AMC: what to check

Maintenance and repair services are generally covered under SAC 9987 and taxed at 18% GST, and you show the GST on each invoice if you are registered. If your contract includes parts, the tax treatment of the parts and the service together can differ, so confirm the rate, the place of supply and how to invoice with your CA or accountant. Rates and rules change, so check the current position on the GST portal too. For a similar walkthrough of codes, see our guide to HSN and SAC codes and GST for repair shops.

Renewal tips that protect your recurring revenue

  • Remind before expiry. Contact the customer 30 days or more before the end date, not after it lapses. A lapsed contract is far harder to win back.
  • Review the visit history first. Check which visits were done, which equipment had repeat faults and where a customer used breakdown calls heavily. Use that to adjust the scope or the value at renewal.
  • Update the equipment schedule. Add new items and remove ones that were replaced, so the next contract matches reality.
  • Put the new term in writing. Issue a fresh contract number or a signed renewal, rather than relying on an informal “carry on”.

How BytePhase runs the contract after it is signed

A signed contract only pays off if the visits actually happen. In BytePhase AMC management software you record the contract once and the software helps you run it:

  • The contract holds the customer and assignee, the AMC or CMC type, start and end dates, response time, on-site or carry-in, the amount and the payment frequency.
  • Each device is listed with its serial number and warranty dates.
  • Service visits are planned across the contract, each assigned to a technician and marked Free or Paid, with service charge, tax and travel expense where it applies.
  • Customers can raise complaints from their portal.
  • Renewal emails go to the customer and the assignee 15 days before the end date, 1 day before and on the day itself, and the contract list shows Active, Renewal pending or Expired.
  • You can print or share the contract. See how to configure AMC contract print options.

If you run an AC business, our piece on AC repair business management shows where AMC fits into the day-to-day work.

Frequently asked questions

What should an AMC contract format include?2026-01-01T10:00:00+00:00

It should include both parties with addresses and GSTIN, a contract number, start and end dates, an equipment schedule with make, model, serial number and location, the type of cover (AMC or CMC), the number and timing of preventive visits, breakdown response time, on-site or carry-in service, parts coverage and exclusions, the contract value with GST and payment terms, renewal and termination terms, and signatures from both sides.

What is the difference between AMC and CMC?2026-01-01T10:01:00+00:00

An AMC (non-comprehensive) covers labour and service visits, and replacement parts are charged separately. A CMC (comprehensive maintenance contract) also includes replacement of the parts listed in the contract, so the value is higher. Both normally exclude physical damage, consumables, power-surge faults and misuse.

How many preventive maintenance visits should an AMC include?2026-01-01T10:02:00+00:00

There is no fixed number. It depends on the equipment and how heavily it is used. Many service contracts plan two to four visits a year, spread evenly, for example one every three months. Write the number and the schedule into the contract and give the customer a service report after every visit.

Is GST charged on an AMC?2026-01-01T10:03:00+00:00

If you are GST-registered, GST applies to the contract value. Maintenance and repair services are generally covered under SAC 9987 at 18%, but the treatment can differ when parts are supplied together with the service. Confirm the rate and how to invoice with your CA or accountant.

When should I remind a customer to renew an AMC?2026-01-01T10:04:00+00:00

Start at least 30 days before the end date, and check the visit history first so you can adjust the scope or value. A reminder after the contract has lapsed is far less likely to win the renewal. BytePhase also emails the customer and the assignee 15 days and 1 day before the end date and on the day.

The bottom line

A good AMC contract format is short, specific and signed: the equipment is listed, the visits are scheduled, the exclusions are clear and the renewal date is known. Start from the blank format above, adapt it with your lawyer, and then use AMC management software to keep every visit and renewal on track. BytePhase is used by 2,000+ businesses in 40+ countries.

Run every contract, visit and renewal in one place with BytePhase AMC software. Try it for 15 days or book a demo:

Share Post
BytePhase Technologies

BytePhase Technologies

Stay in a loop

Subscribe to our free Newsletter

Go to Top